Micro AC speed control motor

Features

1.It is a unit of controller and motor, There is no need wiring alone because motor and controller only need one time connecting. Speed can be simply controlled by the external potentiometer. Speed control circuit, capacitor and speed setter are mounted on the controller. The unitary speed controller is without instant stop function.

2. The controller can make the speed variable between 90-1350rpm at 50Hz and 90-1650rpm at 60Hz.

3.Please do not make motor run at a low speed to avoid overheat.

Model selection factors

1.Please specify the power of motor: we have 6W-250W options for micro gear motor.
2.General Voltage: Single phase 110V, 220V, 100V 50Hz/60Hz; Three phase 220V, 380V 50Hz/60Hz
3.Frame size of motor: 60*60mm. 70*70mm, 80*80mm, 90*90mm, 104*104mm
4.Poles of motor: 2P, 4P,6P, 8P
5.Ratio: Ratio of gearbox--your required output speed for motor/rated motor speed
6.The gearbox frame size must be same with size of motor

This motor can rotate at clockwise and counter clockwise. For single phase motor, please change the rotate direction after motor stop.

Micro AC brake gear motor1

Micro AC brake gear motor12

parameters

6W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
2IK6RGN-A	2IK6RA-A	6	1ph 100	50	90-1350	50	30	35	0.24	3.5
				60	90-1650	50	29	35	0.25
2IK6RGN-E	2IK6RA-E	6	1ph 110	60	90-1650	50	29	30	0.16	2
			1ph 120						0.18
2IK6RGN-C	2IK6RA-C	6	1ph 220	50	90-1350	55	29	35	0.13	0.8
			1ph 230						0.11
2IK6RGN-H	2IK6RA-H	6	1ph 220	60	90-1650	55	29	35	0.14	0.8
			1ph 230						0.12

15W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
3IK15RGN-A	3IK15RA-A	15	1ph 100	50	90-1350	120	35	55	0.35	6
				60	90-1650				0.33
3IK15RGN-E	3IK15RA-E	15	1ph 110	60	90-1650	125	35	55	0.3	5
			1ph 120						0.32
3IK15RGN-C	3IK15RA-C	15	1ph 220	50	90-1350	120	35	54	0.18	1.2
			1ph 230						0.2
3IK15RGN-H	3IK15RA-H	15	1ph 220	60	90-1650	85	35	52	0.16	1.2
			1ph 230			105		55	0.15

25W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
4IK25RGN-A	4IK25RA-A	25	1ph 100	50	90-1350	190	47	88	0.5	8
				60	90-1650				0.55
4IK25RGN-E	4IK25RA-E	25	1ph 110	60	90-1650	190	50	108	0.45	7
			1ph 120						0.5
4IK25RGN-C	4IK25RA-C	25	1ph 220	50	90-1350	190	47	88	0.25	1.8
			1ph 230						0.23
4IK25RGN-H	4IK25RA-H	25	1ph 220	60	90-1650	190	45	88	0.23	1.8
			1ph 230

40W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
5IK40RGN-A	5IK40RA-A	40	1ph 100	50	90-1350	260	70	180	0.65	12
				60	90-1650				0.7
5IK40RGN-E	5IK40RA-E	40	1ph 110	60	90-1650	260	65	180	0.55	8
			1ph 120						0.6
5IK40RGN-C	5IK40RA-C	40	1ph 220	50	90-1350	300	75	160	0.35	2.5
			1ph 230						0.4
5IK40RGN-H	5IK40RA-H	40	1ph 220	60	90-1650	230	70	145	0.35	2.5
			1ph 230						0.4

60W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
5IK60RGN-AF	5IK60RA-AF	60	1ph 100	50	90-1350	460	140	265	1	20
				60	90-1650	490	160		1.1
5IK60RGN-EF	5IK60RA-EF	60	1ph 110	60	90-1650	490	160	265	0.8	12
			1ph 120						0.85
5IK60RGN-CF	5IK60RA-CF	60	1ph 220	50	90-1350	490	140	265	0.5	4
			1ph 230						0.55
5IK60RGN-HF	5IK60RA-HF	60	1ph 220	60	90-1650	490	160	265	0.5	4
			1ph 230						0.55

90W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
5IK90RGU-AF	5IK90RA-AF	90	1ph 100	50	90-1350	710	230	405	1.55	25
				60	90-1650		260		1.85
5IK90RGU-EF	5IK90RA-EF	90	1ph 110	60	90-1650	710	260	410	1.4	20
			1ph 120						1.45
5IK90RGU-CF	5IK90RA-CF	90	1ph 220	50	90-1350	710	230	410	0.72	5
			1ph 230						0.7
5IK90RGU-HF	5IK90RA-HF	90	1ph 220	60	90-1650	710	260	410	0.71	5
			1ph 230						0.75

120W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
5IK120RGU-AF	5IK120RA-AF	120	1ph 100	50	90-1350	750	360	530	2.1	30
				60	90-1650				2.5
5IK120RGU-EF	5IK120RA-EF	120	1ph 110	60	90-1650	750	360	530	1.65	25
			1ph 120						1.8
5IK120RGU-CF	5IK120RA-CF	120	1ph 220	50	90-1350	750	360	530	1	7
			1ph 230						0.95
5IK120RGU-HF	5IK120RA-HF	120	1ph 220	60	90-1650	750	360	530	1	7
			1ph 230						0.95

120W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
6IK120RGU-AF	6IK120RA-AF	120	1ph 100	50	90-1350	750	360	530	2.1	30
				60	90-1650				2.5
6IK120RGU-EF	6IK120RA-EF	120	1ph 110	60	90-1650	750	360	520	1.7	20
			1ph 120						1.8
6IK120RGU-CF	6IK120RA-CF	120	1ph 220	50	90-1350	750	330	530	0.95	8
			1ph 230
6IK120RGU-HF	6IK120RA-HF	120	1ph 220	60	90-1650	750	360	530	0.95	8
			1ph 230						1

140W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
6IK140RGU-AF	6IK140RA-AF	140	1ph 100	50	90-1350	830	420	620	2.7	35
				60	90-1650				3
6IK140RGU-EF	6IK140RA-EF	140	1ph 110	60	90-1650	830	420	620	1.8	25
			1ph 120						1.95
6IK140RGU-CF	6IK140RA-CF	140	1ph 220	50	90-1350	830	420	620	1.05	10
			1ph 230						1.15
6IK140RGU-HF	6IK140RA-HF	140	1ph 220	60	90-1650	830	420	620	1.05	10
			1ph 230						1.15

180W speed control motor
Model Lead Wire Type		Max. Output Power	Voltage	Frequency	Speed Control Range	Permitted Torque		Starting Torque	Current	Capacitor
Pinion Shaft	Round Shaft	W	V	Hz	r/min	1200r/min mN.m	90r/min mN.m	mN.m	r/min	μF
6IK200RGU-CF	6IK200RA-CF	200	1ph 220	50	90-1350	920	500	1000	1.4	10
			1ph 230
6IK200RGU-HF	6IK200RA-HF	200	1ph 220	60	90-1650	920	500	1000	1.4	10
			1ph 230

parameters

Allowance Torque Of Gearbox					Upside(N.m) / Downside(kgf.cm)
Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
2GN K	50Hz	0.12	0.14	0.19	0.23	0.29	0.35	0.49	0.58	0.7	0.88	1.1	1.3	1.6	1.9	2.4	2.9	3	3	3	3	3
	50Hz	1.22	1.43	1.94	2.35	2.96	3.57	5	5.92	7.14	8.98	11.2	13.3	16.3	19.4	24.5	29.6	30	30	30	30	30
	60Hz	0.1	0.12	0.16	0.19	0.24	0.29	0.41	0.49	0.58	0.73	0.88	1.1	1.3	1.6	2	2.4	2.6	3	3	3	3
	60Hz	1.02	1.22	1.63	1.94	2.45	2.96	4.18	5	5.92	7.45	8.98	11.2	13.3	16.3	20.4	24.5	26.5	30	30	30	30

Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
3GN K	50Hz	3	0.36	0.51	0.61	0.76	0.91	1.3	1.5	1.8	2.3	2.7	3.3	4.1	5	5	5	5	5	5	5	5
	50Hz	3.06	3.67	5.2	6.22	7.75	9.28	13.2	15.3	18.3	23.4	27.5	33.7	41.8	50	50	50	50	50	50	50	50
	60Hz	0.26	0.31	0.43	0.51	0.64	0.77	1.1	1.3	1.5	1.9	2.3	2..8	3.5	4.2	5	5	5	5	5	5	5
	60Hz	2.65	3.16	4.38	5.2	6.53	7.85	11.2	13.2	15.3	19.3	23.4	28.5	35.7	42.8	50	50	50	50	50	50	50

Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
4GN K	50Hz	0.49	0.58	0.81	0.97	1.2	1.5	2	2.4	2.9	3.7	4.4	5.3	6.6	7.9	8	8	8	8	8	8	8
	50Hz	5	5.91	8.26	9.89	12.2	15.3	20.4	24.4	29.6	37.7	44.9	54.1	67.3	80	80	80	80	80	80	80	80
	60Hz	0.4	0.48	0.67	0.8	1	1.2	1.7	2	2.4	3	3.6	4.3	5.4	6.5	8	8	8	8	8	8	8
	60Hz	4.08	4.89	6.83	8.16	10.2	12.2	17.3	20.4	24.4	30.6	36.7	43.8	55.1	66.3	80	80	80	80	80	80	80

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK40GN-A 5IK40GN-E 5IK40GN-C 5IK40GN-H 5IK40GN-S	5GN K	Allowance Torque	50Hz	0.77	0.92	1.3	1.5	1.9	2.3	3.2	3.8	4.6	5.7	6.9	8.3	10	10	10	10	10	10	10	10	10
			50Hz	7.85	9.38	13.2	15.3	19.4	23.4	32.6	38.7	46.9	58.1	70.4	84.7	100	100	100	100	100	100	100	100	100
			60Hz	0.63	0.76	1.1	1.3	1.6	1.9	2.6	3.2	3.8	4.7	5.7	6.8	8.6	10	10	10	10	10	10	10	10
			60Hz	6.42	7.75	11.2	13.2	16.3	19.3	26.5	32.6	38.7	47.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK60GN-AF 5IK60GN-EF 5IK60GN-CF 5IK60GN-HF 5IK60GN-SF	5GN K	Allowance Torque	50Hz	1.1	1.4	1.9	2.3	2.9	3.4	4.8	5.7	6.8	8.6	10	10	10	10	10	10	10	10	10	10	10
			50Hz	11.2	14.2	19.3	23.4	29.6	34.7	48.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100	100	100	100
			60Hz	0.92	1.1	1.5	1.8	2.3	2.8	3.8	4.6	5.5	6.9	8.3	10	10	10	10	10	10	10	10	10	10
			60Hz	9.38	11.2	15.3	18.3	23.4	28.5	38.7	46.9	56.1	70.1	84.7	100	100	100	100	100	100	100	100	100	100

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK60GU-AF 5IK60GU-EF 5IK60GU-CF 5IK60GU-HF 5IK60GU-SF	5GU K 5GU KB	Allowance Torque	50Hz	1.1	1.4	1.9	2.3	2.9	3.4	4.8	5.7	6.8	8.6	10	10	10	10	10	10	10	10	10	10	10
			50Hz	11.2	14.2	19.3	23.4	29.6	34.7	48.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100	100	100	100
			60Hz	0.92	1.1	1.5	1.8	2.3	2.8	3.8	4.6	5.5	6.9	8.3	10	10	10	10	10	10	10	10	10	10
			60Hz	9.38	11.2	15.3	18.3	23.4	28.5	38.7	46.9	56.1	70.1	84.7	100	100	100	100	100	100	100	100	100	100

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK90GU-AF 5IK90GU-EF 5IK90GU-CF 5IK90GU-HF	5GU K 5GU KB	Allowance Torque	50Hz	1.7	20	2.8	3.4	4.3	5.1	6.4	7.7	9.2	11.6	13.6	16.6	20	20	20	20	20	20	20	20	20
			50Hz	17.3	20.4	28.6	34.7	43.9	52	65.3	78.6	93.3	118	139	169	200	200	200	200	200	200	200	200	200
			60Hz	1.4	1.7	2.5	2.8	3.5	4.2	5.2	6.2	7.5	9.4	11.3	13.5	18.8	20	20	20	20	20	20	20	20
			60Hz	14.3	17.3	25.5	28.6	35.7	42.9	53.1	63.3	76.5	95.9	115	138	192	200	200	200	200	200	200	200	200

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK120GU-AF 5IK120GU-EF 5IK120GU-CF 5IK120GU-HF	5GU K 5GU KB	Allowance Torque	50Hz	2.3	2.7	3.8	4.5	5.6	6.8	8.5	10.2	12.2	15.3	18.4	20	20	20	20	20	20	20	20	20	20
			50Hz	23.4	27.5	38.7	45.9	57.1	69.3	86.7	104	124	156	187	200	200	200	200	200	200	200	200	200	200
			60Hz	1.8	2.2	3	3.6	4.6	5.5	6.8	8.2	9.8	12.4	14.9	17.8	18.8	20	20	20	20	20	20	20	20
			60Hz	18.3	22.4	30.6	36.7	46.9	56.1	69.5	83.6	100	126	152	181	192	200	200	200	200	200	200	200	200

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK120GU-AF 6IK120GU-EF 6IK120GU-CF 6IK120GU-HF	6GU K	Allowance Torque	50Hz	2.3	2.7	3.8	4.5	5.6	6.8	8.5	10.2	12.2	15.3	18.4	22.1	30.7	36.8	40	40	40	40	40	40	40
			50Hz	23.4	27.5	38.7	45.9	57.1	69.3	86.7	104	124	156	187	225	313	375	400	400	400	400	400	400	400
			60Hz	1.8	2.2	3	3.6	4.6	5.5	6.8	8.2	9.8	12.4	14.9	17.8	24.8	29.7	37.1	40	40	40	40	40	40
			60Hz	18.3	22.4	30.6	36.7	46.9	56.1	69.5	83.6	100	126	152	181	253	303	378	400	400	400	400	400	400

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK140GU-AF 6IK140GU-EF 6IK140GU-CF 6IK140GU-HF	6GU K	Allowance Torque	50Hz	2.6	3.1	4.4	5.2	5.2	6.6	9.9	11.8	14.2	17.8	21.4	25.7	35.6	40	40	40	40	40	40	40	40
			50Hz	26.5	31.6	44.8	53	53	80.6	101	120	144	181	218	262	263	400	400	400	400	400	400	400	400
			60Hz	21	2.5	3.5	4.2	4.2	6.3	7.9	9.5	11.4	14.4	17.2	20.7	28.7	34.5	37.1	40	40	40	40	40	40
			60Hz	21.4	25.5	35.7	42.8	42.8	54.2	80.6	96.9	116	147	175	211	292	352	378	400	400	400	400	400	400

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK200GU-AF 6IK200GU-EF 6IK200GU-CF 6IK200GU-HF 6IK200GU-SF	6GU K	Allowance Torque	50Hz	3.71	4.46	6.19	7.43	9.28	11.1	13.9	16.7	20.1	25.2	30.3	36.3	40	40	40	40	40	40	40	40	40
			50Hz	37.9	45.5	63.1	75.8	94.7	114	142	171	205	257	309	370	400	400	400	400	400	400	400	400	400
			60Hz	2.99	3.59	4.99	5.99	7.49	8.98	11.2	13.5	16.2	20.3	24.4	29.3	40	40	40	40	40	40	40	40	40
				30.6	36.7	50.9	61.1	76.4	91.7	115	138	165	207	249	299	400	400	400	400	400	400	400	400	400

Application

Various industrial production lines, coveyor machinery, food machinery, medical machinery, printing machinery, office facility, instrument, automatic mahjong machine

FAQ

1.Lead time: Normally 10-15 days after confirm your deposit.

2.MOQ is 1 PC

3.Warranty: 1 year

4.Gear motor can be customized?
Yes, please advise your technical requirement..

5.Where is the gear motor manufactured?
Produced in China Mainland.

6.Your gear motor was ever shipped to which countries?
Our gear motor has been sold to various countries like Russia, Vietnam, Canada, Australia, UAE, Japan etc..

Installation

1.Please make the central axis centered when install the gear motor, the error shouldn’t be greater than use compensation value of coupler. Good centring can extend the service life and realize a ideal transmission efficiency.

2.Hummer knocking is forbidden when mounting driving medium on the output shaft. Generally we make use of assemble fixture and inner thread of shaft, bolt to press driving medium, otherwise the inner parts of gear motor may be damaged.

3.Gear motor should be tightly mounted on stable horizontal base, make sure the oil can be exhausted from oil drain tank and the cold air can circulate fluently. Because vibration and noise will be caused by unreliable base during running, the bearing and gears also will be damaged. When driving medium has outthrust or use gear, chain wheel to drive, please add a protective device.

4.As per the prescribed mounting unit, guarantee the workers can close to oil pointer, breather plug and oil drain plug more conveniently. After move gear motor to its place, inspect comprehensively the compaction reliability of each fasteners. Gear motor is lubricated by oil grease, please replace the screw plug with breather plug before operation.

Note: After a certain time running of the gear motor, please regularly check the gearbox oil level to avoid the probable leakage caused by motor shell. For example, overloading or overtop working temperature will affect the usage of gear motor. So different gear motors will be selected according the different temperatures.

How to store the reducer?

1)Keep the reducer in a clean and dry place.

2)If it will be stored outdoor or in a humid place, please put the reducer in a box and packed tightly with plastic bag to avoid the rain and external erosion. ( take measure of anti-condensation and anti-rust)

Cautions during operation:

1)Overload is forbidden.

2)Input speed can not exceed the proper max. Speed.

3)Please stop and check the reducer if there are the following occurs:

Temperature rise suddenly

Abnormal big noise in a sudden

Speed became unstable suddenly

4) Please change the motor shaft direction after stop motor.

Warranty instruction:
The following cost and damages are not included in our warranty:

1)Freight cost
2)If the Reducer connect with or insert in a unit, when we dismounting or mounting on the unit and other extra action, there will be a cost.( this is not contained in the warranty)
3)The indirect damage that user lost the appliance chance or business break off due to reducer breakdown.
4)Other derivative and accompanying damages.

Download

Download Micro AC speed control motor catalog

Features

Model selection factors

parameters

parameters

Application

FAQ

Installation

Download

Related Products